Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Genuine TRP 5.0mm reinforced hydraulic brake hose assembly, complete with the original banjo fitting, barb, olive and compression hardware.
Designed primarily as a replacement hose for TRP HD-M843 / Trail EVO hydraulic disc brakes, the reinforced multi-layer construction helps minimise hose expansion under hard braking, maintaining a firm and consistent lever feel.
These are brand-new take-off parts, removed from new complete bicycle/brake assemblies and never used for actual riding. As they have been removed from assembled hydraulic brakes, a small amount of residual mineral oil may remain inside the hose. This is completely normal and does not indicate previous use or a product defect.
Features
• Genuine TRP original brake hose assembly
• 5.0mm outer diameter hydraulic hose
• 5-layer reinforced construction
• Helps minimise hose expansion under high braking pressure
• Banjo-style calliper connection
• Genuine TRP barb and olive
• Includes compression fitting hardware
• Can be cut to the required length
• Ideal for replacement, servicing, or custom brake installation
• Excellent choice for Trail, Enduro and DH applications
Specifications
• Brand: TRP
• Type: Hydraulic Brake Hose Assembly
• Hose Diameter: 5.0mm OD – 2.2mm ID
• Construction: 5-Layer Reinforced Hydraulic Hose
• Connection: Banjo Type
• Brake Fluid: Mineral Oil system
• Primary Fitment: TRP HD-M843 / EVO PRO, EVO X, DH-R EVO, Trail EVO, Slate EVO, Slate T4, HD-T910, Hylex, Hywire
• Condition: Brand New Take-Off
Compatibility
Designed for TRP HD-M843 / Trail EVO and may also suit other TRP hydraulic brake systems using the same 5.0mm banjo-style hose and fittings.
Please compare your existing hose, banjo connection and brake model before ordering. If you’re unsure, send us your brake model and we’ll do our best to confirm compatibility.
Package Includes
• 1 × Genuine TRP 5.0mm Hydraulic Brake Hose
• 1 × Banjo Fitting Assembly
• 1 × Genuine TRP Barb
• 1 × Olive
• Applicable Compression Nut / Fittings
Important – New Take-Off Part
This is a brand-new take-off component, removed from a new complete bicycle or brake assembly before being ridden.
A small amount of residual mineral oil may remain inside the hose due to its original installation. This is normal and is not evidence of wear or previous riding use.
TB Tech Tip
If shortening the hose, make a clean, square cut using a proper hydraulic hose cutter and always install the barb and olive correctly. Once the hydraulic system has been opened, the brake should be checked and bled as required before riding.
Hydraulic brakes are a safety-critical component. If you’re not confident cutting, installing or bleeding a brake hose, we recommend having the work completed by an experienced bicycle mechanic.
Genuine TRP 5.0mm reinforced hydraulic brake hose assembly, complete with the original banjo fitting, barb, olive and compression hardware.
Designed primarily as a replacement hose for TRP HD-M843 / Trail EVO hydraulic disc brakes, the reinforced multi-layer construction helps minimise hose expansion under hard braking, maintaining a firm and consistent lever feel.
These are brand-new take-off parts, removed from new complete bicycle/brake assemblies and never used for actual riding. As they have been removed from assembled hydraulic brakes, a small amount of residual mineral oil may remain inside the hose. This is completely normal and does not indicate previous use or a product defect.
Features
• Genuine TRP original brake hose assembly
• 5.0mm outer diameter hydraulic hose
• 5-layer reinforced construction
• Helps minimise hose expansion under high braking pressure
• Banjo-style calliper connection
• Genuine TRP barb and olive
• Includes compression fitting hardware
• Can be cut to the required length
• Ideal for replacement, servicing, or custom brake installation
• Excellent choice for Trail, Enduro and DH applications
Specifications
• Brand: TRP
• Type: Hydraulic Brake Hose Assembly
• Hose Diameter: 5.0mm OD – 2.2mm ID
• Construction: 5-Layer Reinforced Hydraulic Hose
• Connection: Banjo Type
• Brake Fluid: Mineral Oil system
• Primary Fitment: TRP HD-M843 / EVO PRO, EVO X, DH-R EVO, Trail EVO, Slate EVO, Slate T4, HD-T910, Hylex, Hywire
• Condition: Brand New Take-Off
Compatibility
Designed for TRP HD-M843 / Trail EVO and may also suit other TRP hydraulic brake systems using the same 5.0mm banjo-style hose and fittings.
Please compare your existing hose, banjo connection and brake model before ordering. If you’re unsure, send us your brake model and we’ll do our best to confirm compatibility.
Package Includes
• 1 × Genuine TRP 5.0mm Hydraulic Brake Hose
• 1 × Banjo Fitting Assembly
• 1 × Genuine TRP Barb
• 1 × Olive
• Applicable Compression Nut / Fittings
Important – New Take-Off Part
This is a brand-new take-off component, removed from a new complete bicycle or brake assembly before being ridden.
A small amount of residual mineral oil may remain inside the hose due to its original installation. This is normal and is not evidence of wear or previous riding use.
TB Tech Tip
If shortening the hose, make a clean, square cut using a proper hydraulic hose cutter and always install the barb and olive correctly. Once the hydraulic system has been opened, the brake should be checked and bled as required before riding.
Hydraulic brakes are a safety-critical component. If you’re not confident cutting, installing or bleeding a brake hose, we recommend having the work completed by an experienced bicycle mechanic.